D600 Construction Adhesive is a high strength, professional quality adhesive specifically formulated to eliminate much of the nailing required for construction purposes. The adhesive provides a high strength, water resistant band to a wide variety of materials, including wood, structural flooring panels, particle board, masonry, aluminum, galvanized iron, steel, concrete and fibrous cement sheeting. No suitable for ethylene foam material.
CHARACTERISTICS of liquid nail:
1. High strength and Professional quality adhesive.
2. Excellent resistance to weather, suitable to use indoor and outdoor.
3. Excellent adhesion, little abnormal odors, can painting after it dry.
DIRECTION of Heavy Duty Construction Adhesion:
In sure the surfaces are dry and clear. Grease and opening.Apply using a cartridge gun Assemble Joint within 10 minutes using nails, screws or clamping sufficient to give contact .Over the whole area. Allow adhesive to set(at least 24 hours)before removing clamps or temporary On flat surfaces, apply full length beads at least every 40cm. Lightweight materials and low stress joints can be bonded by “contact bonding”. Apply adhesive and assemble joint as above. Then pull surfaces apart, wait a few minutes to let it dry, then press surfaces firmly together and tap firmly along the joints.
CLEAR UP of Heavy Duty Construction Adhesion
Remove uncured adhesive with xylene or scraper. Cured adhesive is best removed by scraping or sanding.
STORAGE of Heavy Duty Construction Adhesion
Store inside where possible, out of direct sunlight. Storage areas should be well ventilated and kept to a maximum of 27℃.
SAFETY DIRECTIONS of liquid nail:
Avoid contact with eyes and skin. If poisoning occurs, contact a doctor. If swallowed Do not induce vomiting. Keep out of reach of children. Highly Flammable, Use in well ventilated areas away from heat, sparks and naked flames.
Usage and Project
Usage of Silicone Sealant
Engineering Projects Of Our Silicon Sealant
Show room and office
Our Show Room of all kinds of Silicone Sealant
Color of Silicone Sealant
Black, White, Grey, Clear,others
The Bueatiful Factory in Guangzhou of China
Guangzhou SPOD Industry Co., Ltd is a company that mainly produced and selling silicone sealants series.
Company has it own wide stretch production area which with an area of more than 50000 square meter, and have our own high environment protection standards of modern plant that located at the mountain side.
“Value the good faith, and the quality is invaluable” is our commitment .We advocate and carry it out in our daily production.
Company has a professional technical development team and outfits a high-level lab.Company’s management is following the provision of ISO9001 Quality Management System.
We, the people of SPOD consist on the spirit of “Focus on innovation, arts and expertise in ground”, to make our target “try to surpass in a harmonious condition “to come true.
We aim to build up good partner ship with our business friends. Welcome your order.